Value figures based on 8,125 tenders with a published contract value.
Most frequent contracting authorities
Tenders
- APO 259 INFRA - Suministro e Instalación de Motor y Bomba sobre BancadaJefatura de la Sección Económico Administrativa 22 - Base Aérea de Torrejón (Agrupación de Base)€31.4kDeadline 08/11/2026
- Excavation procurement"МЕРКУР" СПЕЦИЈАЛНА БОЛНИЦА ЗА ЛЕЧЕЊЕ И РЕХАБИЛИТАЦИЈУon requestDeadline 09/11/2026
- ZP.271.27.2026 Purchase and delivery of a pump unit for contaminated waterGmina Miejska Hajnówkaon requestDeadline 09/11/2026
- ZP.271.27.2026 Purchase and delivery of a pump unit for contaminated waterGmina Miejska Hajnówkaon requestDeadline 09/11/2026
- Purchase of pharmacy equipment and technical maintenance. Part 2. Peristaltic pump (repeated)"Bērnu klīniskā universitātes slimnīca" VSIA€66kDeadline 09/11/2026
- 4WOG-4700.2712.28.2026 Purchase of manual column pumps4 Wojskowy Oddział Gospodarczy w Gliwicachon requestDeadline 09/11/2026
- ZP.271.27.2026 Purchase and delivery of a pump unit for contaminated waterGmina Miejska Hajnówkaon requestDeadline 09/11/2026
- Purchase and installation of a pellet heating boiler and heat pump at the LVM Southern Kurzeme region customer center."Latvijas valsts meži" ASon requestDeadline 09/11/2026
- DL.4231.82.2026.AS "Construction of a free-standing two-bay garage in accordance with the task titled 'Modernization and purchases for the Volunteer Fire Department' at 142 Pszczyńska Street in Jastrzębie-Zdrój"Urząd Miasta Jastrzębie-Zdrójon requestDeadline 09/11/2026
- Vír – reconstruction of the WWTP, replacement of control valves for sand and GAU filters and sedimentation tanks – Phase 2Svaz vodovodů a kanalizací Žďárskoon requestDeadline 09/11/2026
- Redukční ventily, regulátory podtlaku, průtokoměry kyslíku a zvlhčovačeFakultní nemocnice Olomoucon requestDeadline 09/11/2026
- Procurement of equipment required for water treatmentNitrokémia Környezetvédelmi Tanácsadó és Szolgáltató Zártkörűen működő részvénytársaságon requestDeadline 09/11/2026
- Procurement of equipment required for water treatmentNitrokémia Környezetvédelmi Tanácsadó és Szolgáltató Zártkörűen működő részvénytársaságon requestDeadline 09/11/2026
- Fourniture et entretien de pompes de relevage et de vis de relevage pour l'usine de traitement des eaux usées AQUAPOLE
Lot 1 _Fourniture et maintenance de pompes centrifuge supérieur à 30KWGRENOBLE ALPES METROPOLEon requestDeadline 09/11/2026
- Fourniture et entretien de pompes de relevage et de vis de relevage pour l'usine de traitement des eaux usées AQUAPOLELot 1 _Fourniture et maintenance de pompes centrifuge supérieur à 30KWLot 2 _Fourniture, maintenance et retrofit de vis de relevageLot 3_ Fourniture et maintenance de motoréducteur des vis de relevageGRENOBLE ALPES METROPOLEon requestDeadline 09/11/2026
- Fourniture et entretien de pompes de relevage et de vis de relevage pour l'usine de traitement des eaux usées AQUAPOLE
Lot 1 _Fourniture et maintenance de pompes centrifuge supérieur à 30KW
Lot 2 _Fourniture, maintenance et retrofit de vis de relevage
Lot 3_ Fourniture et maintenance de motoréducteur des vis de relevageGRENOBLE ALPES METROPOLE€1.1mDeadline 09/11/2026
- Outdoor swimming pool in Moravská Třebová – replacement of pool technologyMěsto Moravská Třebováon requestDeadline 09/11/2026
- procurement of pumps and electric motorsЈКП БЕОЧИН БЕОЧИНon requestDeadline 09/11/2026
- Procurement of equipment required for water treatmentNitrokémia Környezetvédelmi Tanácsadó és Szolgáltató Zártkörűen működő részvénytársaságon requestDeadline 09/11/2026
- Procurement of equipment required for water treatmentNitrokémia Környezetvédelmi Tanácsadó és Szolgáltató Zártkörűen működő részvénytársaságon requestDeadline 09/11/2026
- Procurement of equipment required for water treatmentNitrokémia Környezetvédelmi Tanácsadó és Szolgáltató Zártkörűen működő részvénytársaságon requestDeadline 09/11/2026
- Fourniture et entretien de pompes de relevage et de vis de relevage pour l'usine de traitement des eaux usées AQUAPOLE
Lot 1 _Fourniture et maintenance de pompes centrifuge supérieur à 30KW
Lot 2 _Fourniture, maintenance et retrofit de vis de relevage
Lot 3_ Fourniture et maintenance de motoréducteur des vis de relevageGRENOBLE ALPES METROPOLE€1.1mDeadline 09/11/2026
- Procurement of equipment required for water treatmentNitrokémia Környezetvédelmi Tanácsadó és Szolgáltató Zártkörűen működő részvénytársaságon requestDeadline 09/11/2026
- Procurement of equipment required for water treatmentNitrokémia Környezetvédelmi Tanácsadó és Szolgáltató Zártkörűen működő részvénytársaságon requestDeadline 09/11/2026
- PP/91/2026 Supply of two mobile oil-fired heating boilers with a capacity of 250 kW and 100 kWKomunalne Przedsiębiorstwo Energetyki Cieplnej Spółka z o.o.on requestDeadline 09/11/2026
- Spare parts Luva TENT BАкционарско друштво Електропривреда Србије, Београдon requestDeadline 09/11/2026
- Procurement of a gearbox for rakes at the pumping station - TPP BАкционарско друштво Електропривреда Србије, Београдon requestDeadline 09/11/2026
- Προμήθεια και παράδοση αντλιών και αναδευτήρων (Μίξερ) για τις ανάγκες του Επαρχιακού Οργανισμού Αυτοδιοίκησης ΛάρνακαςΕΠΑΡΧΙΑΚΟΣ ΟΡΓΑΝΙΣΜΟΣ ΑΥΤΟΔΙΟΙΚΗΣΗΣ ΛΑΡΝΑΚΑΣ€250kDeadline 09/11/2026
- Προμήθεια και παράδοση αντλιών και αναδευτήρων (Μίξερ) για τις ανάγκες του Επαρχιακού Οργανισμού Αυτοδιοίκησης ΛάρνακαςΕΠΑΡΧΙΑΚΟΣ ΟΡΓΑΝΙΣΜΟΣ ΑΥΤΟΔΙΟΙΚΗΣΗΣ ΛΑΡΝΑΚΑΣ€250kDeadline 09/11/2026
- Προμήθεια και παράδοση αντλιών και αναδευτήρων (Μίξερ) για τις ανάγκες του Επαρχιακού Οργανισμού Αυτοδιοίκησης ΛάρνακαςΕΠΑΡΧΙΑΚΟΣ ΟΡΓΑΝΙΣΜΟΣ ΑΥΤΟΔΙΟΙΚΗΣΗΣ ΛΑΡΝΑΚΑΣ€250kDeadline 09/11/2026
CPV 421 covers engines, turbines, generators, pumps and compressors for public utility plants, water supply systems and infrastructure operators.
What does CPV 421 cover?
CPV Group 421 covers machinery for the production and transmission of mechanical power, including engines (internal combustion, steam and gas), turbines, hydraulic turbines, wind turbines, pumps, compressors, generators and associated power transmission components. This group is central to the procurement needs of public utilities and infrastructure operators who rely on mechanical power generation equipment for their operations.
Municipal water utilities procure centrifugal and axial pumps for water distribution and pressure management. Gas utilities require high-performance compressors for gas storage and distribution. Power generation companies owned or operated by public bodies procure turbines, generators and associated control systems. Pumping stations for flood protection, drainage and irrigation fall within this group, as do backup generator sets for hospitals, data centres and emergency infrastructure.
Energy efficiency and lifecycle cost are key criteria in the procurement of power generation and transmission machinery. The EU's Ecodesign Regulation and motor efficiency standards (IE3 and above) set minimum energy performance requirements for electric motors and pumps used in public installations. Framework agreements for spare parts and maintenance are commonly awarded alongside capital equipment contracts. Further information on the CPV system is available from the European Commission (SIMAP) and in Regulation (EC) No 213/2008.
Typical Services in CPV 421
- Supply of centrifugal and submersible pumps for water distribution
- Compressors for gas distribution networks and compressed air systems
- Generator sets for emergency power supply and backup systems
- Turbines and drive systems for power generation facilities
- Hydraulic machinery for flood gates, sluices and tidal control structures
- Power transmission components: gearboxes, couplings and drive shafts
Examples of Tenders with CPV 421
- Pump Replacement Programme, Regional Waterworks: A regional water authority tenders the supply and installation of 18 high-efficiency centrifugal pumps (IE3 or better) for its primary and secondary distribution network, including commissioning and three-year warranty.
- Emergency Generator Sets for Hospital Complex: A university hospital procures four diesel generator sets with a combined output of 2.4 MVA for backup power supply to critical care, operating theatres and data infrastructure, with 72-hour autonomous operation.
- Gas Compressor Station Upgrade: A municipal gas utility procures two reciprocating compressors and associated cooling systems for the expansion of its high-pressure gas storage and regulation station.
Current tenders with CPV 421 are published on TED (Tenders Electronic Daily) and on national procurement platforms.
Who is CPV 421 relevant for?
Public Contracting Authorities
Municipal water and gas utilities, flood protection authorities, hospitals, airports, data centres operated by public bodies, and energy generation companies with public ownership are the primary procurers under CPV 421. Energy efficiency standards and lifecycle cost assessments are standard elements of tender specifications for power machinery.
Companies and Bidders
Pump manufacturers, compressor suppliers, generator set producers, turbine engineering companies and power transmission specialists are the core bidders under CPV 421. CE marking, compliance with EU Ecodesign requirements and IEC efficiency standards for electric motors are mandatory for most products. References from comparable utility machinery projects and evidence of commissioning and after-sales capability strengthen bids. Further information is available from the Federal Ministry for Economic Affairs and Climate Action (BMWK).
How does Bond help with CPV 421?
Tender Match – Automatically Find Tenders (CPV 421)
With tender.match, pump manufacturers and power machinery suppliers automatically receive all relevant tenders with CPV 421 directly in their dashboard. BOND indexes tenders from over 1,000 procurement portals in the EU – from TED to national platforms and regional contracting authorities. Instead of manually searching dozens of portals every day, matching power machinery contracts are filtered and delivered by industry, competency, region, and company profile. An automated gap analysis immediately shows where the company meets the requirements and where gaps exist. This ensures companies never miss a deadline and can focus on preparing their bids.
Company Match – Find the Right Partners and Suppliers (CPV 421)
For companies looking for suppliers, subcontractors, or consortium partners for power machinery supply and installation projects, company.match provides direct access to qualified firms from an EU-wide database of over 28 million companies. Especially for larger utility machinery contracts requiring civil, mechanical and electrical integration, company.match automatically identifies suitable partners for bidding consortia and partial services – increasing the chances of winning the contract.
Frequently Asked Questions about CPV 421
What does the CPV code 42100000 mean?
The CPV code 42100000 designates the group "Machinery for producing and harnessing mechanical energy" in the European Common Procurement Vocabulary. It covers engines, turbines, pumps, compressors and generators used in public utility operations and infrastructure.
How do I find tenders with CPV 421?
Tenders with CPV 421 can be searched on TED (Tenders Electronic Daily) using the code filter. The lists current national procurements. Bond automatically delivers profile-matched tenders from over 1,000 EU-wide portals.
What are the requirements for participating in tenders with CPV 421?
CE marking, compliance with EU Ecodesign Regulation and IEC motor efficiency standards are standard requirements. Technical documentation, proof of commissioning capability and references from comparable utility projects are typically required. Applicable rules are set out in the VgV and the UVgO.
See which matches BOND finds for your company.
Free expert call
- 30 minutes
- Online via Microsoft Teams